LB-CY dust collector is a large model for dust collecting in heavy
duty conditions. It is of small size, high efficiency, utility,
obvious effect for energy-saving, easy to maintain and other
advantages. It is used widely in mechanic industry, casting,
welding, construction material, light industry, metallurgy,
chemical industry and etc.
Facility principle:
Dust-laden air goes into dust collector from the top or the side
import, the dust is "closured" by cartridge appearance and gathers
together. The purified air is discharged out from the cartridge
center, which achieve the purification purpose. In order to clean
the cartridge, making use of compressed air (0.6-0.7Mpa) to produce
a strong air current, which release into the cartridge center
through the electromagnetic valve, and oscillate and blow down the
dust accumulated on the external surface of cartridge as the
vibration waves. The dust fall down in the ash bucket in the
following. In order to ensure the cartridge works normally and
continuously, dynamic change dust, the PLC control system blow
conversely.
| Model | Airflow | Cartridge qty | Power | Valve model | Valve qty | Body Size(MM) | Inlet size | Weight |
| LB-CY-4 | 2200-3000 | 4 | 3 | DMF-Z-20 | 4 | 1440*1808*1050 | 200 | 456 |
| LB-CY-6 | 3500-4500 | 6 | 5.5 | DMF-Z-20 | 6 | 1800*1808*1050 | 250 | 592 |
| LB-CY-8 | 4800-6500 | 8 | 5.5 | DMF-Z-20 | 8 | 2210*1928*1050 | 300 | 672 |
| LB-CY-12 | 7500-8600 | 12 | 7.5 | DMF-Z-40S | 4 | 2250*2077*1400 | 350 | 1105 |
| LB-CY-15 | 8900-9750 | 15 | 11 | DMF-Z-40S | 5 | 2950*2077*1400 | 400 | 1301 |
LB-PC Cartridge dust collector
Model | Airflow(m³/h) | Filter qty | Valve type | Body size(mm) |
L | H | W | dia |
LB-PC-12 | 12000-15000 | 12 | DMF-T-40 | 1960 | 2770 | 1362 | 550 |
LB-PC-16 | 16000-20000 | 16 | DMF-T-40 | 1960 | 2770 | 1960 | 650 |
LB-PC-20 | 21000-25000 | 20 | DMF-T-40 | 1960 | 2770 | 1960 | 700 |
LB-PC-24 | 24000-30000 | 24 | DMF-T-40 | 3920 | 2770 | 1362 | 750 |
LB-PC-32 | 32000-40000 | 32 | DMF-T-40 | 3920 | 2770 | 1960 | 850 |
LB-PC-40 | 41000-48000 | 40 | DMF-T-40 | 3920 | 2770 | 1960 | 900 |
LB-PC-48 | 50000-57000 | 48 | DMF-T-40 | 5880 | 2770 | 1960 | 1000 |
LB-PC-60 | 60000-70000 | 60 | DMF-T-40 | 5880 | 2770 | 1960 | 1200 |
LB-C Type Multiple Cartridge Dust Collectors:
| Model | Air Volume
m3/h | Cartidge Q’ty(pc) | Pulse valve | entrance concentration
g/m3 | Emission concentration
mg/m3 | Injection pressure
MPa | Equipment resistance
Pa | Compressor Air m3/min |
| Type | Qty
(pc) |
| LB/C-18 | 8520-11520 | 18 |
DMF
-Z-25 | 3 |
≤50 |
≤50 |
0.5-0.7 |
≤1200 | 0.064 |
| LB/C-24 | 12520-16280 | 24 | 4 | 0.096 |
| LB/C-30 | 16900-20400 | 30 | 5 | 0.128 |
| LB/C-36 | 21280-23920 | 36 | 6 | 0.128 |
| LB/C-48 | 24040-34560 | 48 | 6 | 0.192 |
| LB/C-60 | 28800-38200 | 60 | 6 | 0.256 |
| LB/C-64 | 39720-43080 | 64 | 8 | 0.192 |
| LB/C-70 | 43560-47840 | 70 | 7 | 0.288 |
| LB/C-80 | 46400-50600 | 80 | 8 | 0.384 |
| LB/C-90 | 53080-60120 | 90 | 9 | 0.384 |
| LB/C-108 | 65760-70640 | 108 | 9 | 0.512 |
LB-GD Centrialized high vacuum fume filtration and air cleaner
Application Place:
High vacuum model dust collector mainly applied to purification
dry, no oil, no corrosion of the smoke gas during welding, cutting
and grinding process, can connect with the Robot arm for the
operation condition of the robot welding.
Technical Parameter:
| Model | Airflow
M3/H | Power
KW | air intake
Mm | Voltage
V/HZ | Pressure pa | Size
mm |
| LB-GD-300 | 260~350 | 2.2 | Φ75 | 380/50 | 23000 | 1200*720*1250 |
| LB-GD-520 | 460~550 | 7.5 | Φ100 | 40000 | 1760*720*1520 |
| LB-GD-1000 | 1000-1200 | 18.5 | Φ150 | 30000 | 1950*870*1800 |
| LB-GD-2000 | 1800~2000 | 25 | Φ200 | 31000 | 2000*900*1800 |
| LB-GD-2500 | 2100~2500 | 29 | Φ250 | 27000 | 2100*950*1800 |
Product advantage
This kind of filter with low noise high negative pressure fan, not
only with low noise,but also produce quite high negative pressure.
Can connect to multiple station convulsions dust removal at the
same time.
The equipment adopts the integrated design, compact structure;
cover a small area l, and electric control system use PLC for
automatic control, easy to operation. The high pressure dust
removal system adopts imported and heat-resistant, wear-resistant
high pressure composite suction hose, its inner surface smooth wind
resistance losses small.
According to the different work station requirements, its methods
of catching dust can be used in a high pressure suction mask,
universal environmental protection welding torch, grinding wheel.
We can provide a variety of models according to different working
conditions and dust controlling.
We,Qingdao Loobo Environmental Protection Technology Co.,Ltd is
aimed to air purifying and kinds of removing fume exhausted, with
its own R&D team more than ten years manufacturer, located in
Qingdao city of china, specialized in the main products:
1,portable fume extractor,
2.downdraft benches(grinding dust removal worktable),
3.central fume purification projects,
4.Spare parts:flexible suction arm,etc.
All of our products with the ISO9001, and CE certification for
parts of products, the quality can be guaranteed.
ATTN: Miss Molly Huang
Email: lb044007@loobohb.cn
Skype: mollyhice
Tel: 15064847869
